C4X4.com, C4X4 & the C4x4.com logo are Trademarks of Cross Trail Enterprises Copyright © 1998-2006 by Cross Trail Enterprises, All Rights Reserved
C4x4.com Terms of Use Agreement -- C4x4.com Privacy Policy
Cobra 75 WX ST Jeep
feature banner gif

It is real easy to steal something out of a Jeep. I had already installed a Tuffy Security Glovebox into Project Blue Oval YJ and I have plans for more secure storage in the future (cheap and easy, too!). Electronics are high on the grab list so radios, GPS, CBs, etc are money in the pocket of the opportunistic thief.

When I saw the Cobra 75 WX ST advertised in an ad, I thought it was a neat solution to keeping it where it belonged...in MY Jeep, not someone else's. The controls are all contained in the hand held portion of the unit and when it is not being used, it can be quickly disconnected from the solid mounted portion of the assembly, the remote connection box, and stored away securely in a locking truck or center console.

It features all 40 CB channels, 10 NOAA weather channels, Sound Tracker technology and pretty much anything a full size CB would have.

I wanted to be able to easily disconnect the handheld unit without reaching under the dash all the time, so, since I had my dash apart I scratched my head a while and came up with this stealth spot behind the center instrument pod.

It took a bit of fabbing, but it seems to have worked out. As you can see, the remote connection box does fit past all the instruments and I drilled the hole for the grommet just under the left most edge of the instrument pod. There is no real firm connection holding the cable in place where the jumper out of the box connects to the hand-held section of cable, but it seems to pinch it pretty well. I added a zip tie behind the grommet to help keep the assembly from pulling through. I also had to use a small hole saw to allow for the antenna connection to pass through the metal frame of the dash. If this all does not work out, I will move the connection box and the only thing visible of my folly will be the hole where the grommet was and a sticker or decal can fix that if I care about it.

Project Blue Oval YJ Gets a Stealth CB: Installing a Cobra 75 WX ST

By Michael Troy

cobra 75 wx stcobra 75 wx st jeepcobra 75 wx st jeepcobra 75 wx st jeepcobra 75 wx st jeepcobra 75 wx st jeep
For now, this is as far as it gets until I have more of the interior done including getting the CB antenna mounted on the to-be-fabbed tire carrier. Stay tuned for the rest of the story, but really all you need to do from here is mount the antenna, run the 12V DC power source to the remote control box and get the antenna matched to the CB and coax. I will do all that when the install is wrapped up.
project banner
Jeep
4x4books